uPVC Fascia & Soffit Accessories | Boston, Lincolnshire

Fascia & Soffit — Kirton Trade Counter

Fascia & Soffit Accessories in Kirton, Lincolnshire

A roofline only looks finished once every last detail is right. So, alongside our fascia and soffit boards, we stock the vents, corners, joiners and trims needed to complete the job — all ready to collect from our Kirton trade counter.

✓ Full ventilation range ✓ Colour-matched to all board finishes ✓ Trade & cash pricing ✓ Delivery available

✓ One-stop shop for installers ✓ Same-day collection available ✓ Delivery available

Section 1

Ventilation

A roof needs to breathe. Without enough airflow, moisture can build up in the roof space, and over time this can lead to condensation and rotten timber. So, whether you’re replacing a whole roofline or just topping up an older one, these ventilation products are worth adding to the job.

5M Soffit Ventilation Strip in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
F109

5M Soffit Ventilation Strip (White)

This 5-metre strip slots into soffit boards and lets air move through the roof space, so damp and rot don’t get a chance to set in.

£21.60 + VAT

70mm Circular Soffit Vent in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CSV/WHITE

Circular Soffit Vent 70mm (White)

A simple 70mm vent that fits straight into a drilled soffit board. It’s a quick way to add airflow without much extra work.

£0.33 + VAT

Eaves Protector 1.5m stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
EP15

Eaves Protector 1.5m

Fitted at the roof edge, this strip stops wind and sun from wearing away the felt or membrane underneath. As a result, the roof edge lasts longer.

£2.57 + VAT

Comb Filler 1000mm stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
BCOMB

Comb Filler 1000mm

This strip closes the gap between fascia and roof tiles. So birds and debris stay out, but fresh air can still get through.

£0.47 + VAT

Over Fascia Vent 1m stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FVENT25

Over Fascia Vent (1M)

This 1-metre vent sits under the roof tiles, out of sight, and still gives the roof space the airflow it needs.

£0.78 + VAT

Section 2

Corners & Joiners

Cutting and joining boards by hand takes time, and the result isn’t always neat. That’s why we stock preformed corners and joiners for both square and plain fascia — so hips, wall junctions and board joints look tidy and finished straight out of the box.

300mm Square Fascia Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CRCW10

300mm Square Fascia Corner (White)

A ready-made corner for square fascia, so external joints stay neat without any cutting on site.

£1.13 + VAT

300mm Square Fascia Joint in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CRJW10

300mm Square Fascia Joint (White)

Use this joiner to link square fascia boards along a run, so the join stays neat and weathertight.

£1.02 + VAT

300mm 135 Degree External Plain Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FWFX

300mm 135° External Plain Corner (White)

Made for angled corners such as bay windows, so plain fascia keeps a smooth, finished line even where the roofline bends.

£2.77 + VAT

300mm Plain Fascia 90 Degree Internal Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FWXI

300mm Plain Fascia 90° Internal Corner (White)

Fits internal wall junctions on plain fascia, so there’s no cutting or fitting needed on site.

£1.77 + VAT

500mm Square Face Fix Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CSCW

500mm Square Face Fix Corner (White)

Built for surface-mounted fascia runs, giving a secure, tidy corner without extra fixings.

£1.76 + VAT

500mm Square Fascia Joint in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CSJW

500mm Square Fascia Joint (White)

A longer joiner for square fascia, so bigger rooflines still get a clean, secure join.

£1.76 + VAT

500mm Square 90 Degree Internal Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
CSIW

500mm Square 90° Internal Corner (White)

Finishes internal angles on square fascia neatly, so there’s no gap or rough edge left behind.

£3.17 + VAT

600mm Double Ended Fascia Joiner stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FWJJ

600mm Double Ended Plain Fascia Joiner (White)

This longer joiner spans further than a standard one, so the join sits stronger and stays neater over time.

£1.99 + VAT

600mm Double Ended External Plain Fascia Corner in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FWXX

600mm Double Ended External Plain Fascia Corner (White)

Covers wider box ends and hip junctions in one piece, so there’s less joining and a cleaner overall look.

£1.96 + VAT

Section 3

End Caps & Finials

Every fascia run has to stop somewhere. So these last two pieces close off the ends and finish the roofline properly, right down to the last detail.

Large End Cap Fascia in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
FWDC

Large End Cap Fascia (White)

This cap closes off the end of a fascia run, so the finish looks tidy rather than left open.

£1.77 + VAT

Gable Finial in white stocked at the Elite Plastic Solutions Trade Counter in Kirton, Lincolnshire
DGF1W

Gable Finial (White)

Fitted at the roof apex, this decorative piece finishes the join where two fascia runs meet.

£2.25 + VAT

🎨 Colour Matching

Everything above is stocked in white as standard. However, if your boards are foiled or woodgrain, we can also source matching accessories. So just speak to our trade counter team to check current stock and lead times on colour-matched pieces.

Why Buy From Us

Why Choose Our Trade Counter?

📦

One-Stop Shop

Boards, vents, trims and finishing pieces are all here. So there’s no need to visit more than one supplier.

🏷

Trade Pricing

Rates are competitive as standard. What’s more, you can open a trade account for even better pricing.

💬

Expert Advice

Not sure which vent, corner or joiner you need? Our team can help you pick the right one.

🕐

Same-Day Collection

Stock is held on site, so you can collect what you need the same day.

FAQ

Fascia & Soffit Accessory FAQs

Do I need soffit vents or over fascia vents?

It depends on the roof and what ventilation is already there. Soffit vents are the most common choice and are easy to retrofit. However, over fascia vents work better on cold roof constructions, or where a hidden vent is preferred. So if you’re not sure, our trade counter team can talk you through the options.

What is comb filler and do I need it?

Comb filler seals the gap between the fascia board and the roof tiles. As a result, birds and debris stay out, but air can still get through. Because of this, it’s worth adding to most re-roofing or roofline replacement jobs.

What’s the difference between square and plain fascia corners?

Square fascia has a flat, right-angled edge, while plain fascia has a rounded top. Because corners, joiners and end caps are made to fit one profile or the other, it’s important to match the right piece to your boards. So bring a sample or the product code with you, and our team can confirm the match.

Can I get accessories to match my existing fascia colour?

Our full range is stocked in white as standard. That said, foiled and woodgrain finishes can be sourced to match coloured boards, so call ahead to check availability and lead times.

Do you sell these individually or only as part of a full roofline order?

You can buy these individually. So there’s no need to be ordering a full set of boards just to pick up a few vents, corners, joiners or finials.

Do you offer trade discounts?

Yes — we offer competitive trade pricing for all counter customers. Opening a trade account gives access to even better rates, priority counter service and cash or credit account options. Applications take less than 3 minutes and are approved within one working day.

Is delivery available?

Yes — we can arrange delivery across Lincolnshire and surrounding areas. Delivery charges vary based on location and order size. Call our trade counter team on 01775 661 186 to arrange delivery to your site or business.

Visit Us

Find Our Trade Counter

We’re based in Kirton, so we’re well placed to serve Boston, Spalding, Sleaford, Grantham, Skegness and the surrounding Lincolnshire areas.

Monday – Friday 7:30am – 4:30pm
Saturday 7:30am – 11:30am
Sunday Closed

Waterside Business Park, Avalon Road, Kirton, Boston, PE20 1QR

📍 View on Google Maps ⏩ Get Directions

Also Available from Our Trade Counter

Need Fascia & Soffit Accessories?

Visit our Kirton trade counter, call ahead to check stock, or apply for a trade account for better pricing and priority service.

📞 Call 01775 661 186 Open a Trade Account

Mon–Fri 7:30am–4:30pm  |  Sat 7:30–11:30am